- Running gear
- Engine
- Body
- Drive unit
- Power transmission
- Vehicle electrics
- Heating, ventilation, air conditioning system
- Power unit
- 1.6/77 kW MPI engine
- 1,4/63 kW MPI engine
- 1.2/55 kW TDI CR Engine
- 1.6/55; 66; 77 kW TDI CR Engine
- Technical Data
- Self diagnosis, V.A.G Inspection Service
- Engine assy,cylinder block,crankcase
- Enginecrankshaft group, pistons
- Engine cylinder head, valve gear
- Engine lubrication
- Engine cooling
- Fuel supply, gas operation
- Exhaust turbocharger, G-charger
- Fuel preparation system Diesel injection
- Diesel direct injection system - fitting locations, system overview
- Fuel system, engine side
- Fuel system - Summary of components
- Injection units (piezo injectors) - Summary of components and fitting position of the clamping claw
- Removing and installing injection unit (piezo injector)
- Removing
- Install
- Removing and installing the fuel distributor
- Installing the high pressure lines
- Replace fuel pressure regulating valveN276
- Removing and installing fuel pressure senderG247
- Removing and installing the high pressure pump
- Testing the pressure of the high pressure pump
- Testing the return flow quantity on the high pressure pump
- Check the fuel system for tightness
- Check fuel pressure regulating valveN276
- Checking return flow quantity of injection units
- Carry out the vacuum test of the injection units
- Check the pressure holding valve in the fuel return-flow line
- Intake manifold, air filter
- Engine control unit
- Exhaust system
- Ignition system, glow plug system
- 1,2/63; 77 kW TSI engine
- 1.4/51; 59 kW TDI PD Engine
- 1.2/44; 47; 51; 55 kW MPI engine