–
| Release screws -2- (1.5 Nm). |
–
| Removing supports of the luggage compartment cover -4- (3 Nm). |
–
| Loosen top trim panel for the tailgate -5- on the sides -arrows A- with wedge -3409-. |
–
| Loosen top trim panel for the tailgate -5- at front -arrow B- with wedge -3409- and remove trim panel from the tailgate -1-. |
–
| Installation is carried out in the reverse order; pay attention to the following points: |
–
| Recondition the clips -3- in the top trim panel for the tailgate -5-, if necessary replace with new ones. |
|
|
|