Lubrication system

Make

Skoda

Model

Octavia Mk2

Section

1.4/90 kW TSI engine › Engine lubrication › Lubrication system

Drive unitLubrication system

Lubrication system   Note t  The oil level must not be above the max. marking - risk of damage to catalytic converter! t  If considerable quantities of metal swarf or abrasion is found when carrying out engine repairs, this can be subject to damage to the crankshaft and conrod bearings. In order to avoid consequential damage, after the repair perform the following tasks: –  Carefully clean the oil galleries. –  Replace oil spray jets. –  Replace engine oil cooler. –  Replace oil filter. Inspecting oil pressure → Chapter. Check the engine oil, amount of oil and oil specification → Octavia II

03 Engine