skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the evaporator vent temperature sender G263 > < Removing and installing the Footwell vent temperature senderG192

Octavia Mk2

Removing and installing the middle vent temperature senderG191
Removing and installing the middle vent temperature sender -G191 -
Removing
–  Remove the dash panel → Body Work → Rep. gr.70.
   
–  Unplug connector -3-.
–  Rotate middle vent temperature sender -G191--1- by 90° and remove from housing.
Install
Installation is carried out in the reverse order.
When installing, pay attention to the correct seating of the gasket ring -2-.
  S87-0224

Removing and installing the evaporator vent temperature sender G263 > < Removing and installing the Footwell vent temperature senderG192