skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing clutch > < Clutch cover without bush

Octavia Mk2

Clutch cover with bush
Clutch cover with bush
  Note
t  Clutch cover and circlip must always be replaced → Electronic Catalogue of Original Parts.
   
t  Never install new covers using a hammer and never oil the middle gasket or touch it with the hand!
  Caution
Do not grab a new cover in the center hole. The cover must not be touched and oiled there or come into contact with other materials. This could result in a leakage.
  S30-0154
Do not remove the bush!
The new cover must be free from oil and dry in the area of the middle gasket!
–  If required, clean the shaft end of the clutch cover of the gearbox.
Stickers must not be affixed to the inside of the cover.
–  If this is the case, please remove them carefully!
Only the gasket on the outer edge must be moistened with DSG oil.
  N30-10147
–  Insert clutch cover with bush.
  Caution
Handle with care. Any type of blows - even the slightest one - on the cover can easily lead to leaks.
  N30-10149
It is possible to carefully lever the cover with a screwdriver -1- in its position -arrow-, until the »new« circlip can be installed.
–  Install »new« circlip.
  S30-0161
–  Remove the bush only if the circlip is installed.
  N30-10149

Removing clutch > < Clutch cover without bush