–
| Unscrew screws for oil filter -arrows-. |
–
| Take the oil filter -A- out of the slide valve body. |
–
| Thinly coat gaskets on the intake collar of the oil filter (reverse side) with ATF. |
Note If the gaskets on the reverse side of the oil filter for the slide valve body are defective or no longer properly attached to the oil filter, the oil filter must be replaced. |
–
| Position oil filter on the slide valve body and screw in screws -arrows- to tightening torque → Chapter. |
–
| Top up with ATF and inspect ATF level → Chapter. |
|
|
|