Tighten exhaust gas temperature sender 3 -G495-, vehicles with left-hand drive |
(Fabia II, Roomster, Octavia II, Superb II, Yeti) |
WARNING In this case, the setting of the torque wrench must be 29 Nm. |
The correct torque of 45 Nm is achieved by the extension of the torque wrench using the wrench from the set of tools -T10395/6-. |
|
Only coat the thread with hot bolt paste -G 052 112 A3-. |
–
| Screw in exhaust gas temperature sender 3 -G495- by hand. |
|
|
|