Skoda Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Install cylinder head cover >
< Remove cylinder head cover
Octavia Mk2
Power unit
1,2/63; 77 kW TSI engine
Engine cylinder head, valve gear
Cylinder head - part 2 / moving_and_installing_cylinder_head_cover_and_camshaft/">Removing and installing cylinder head cover and camshaft
Removing and installing camshaft
Removing and installing camshaft
Removing and installing camshaft
Removing
–
Remove fixing bolt -T10414-.
–
Place the cylinder head cover on the work bench as shown.
–
Release the fixing screws for the bearing frame in the specified order
-1-
to
-10-
.
–
Remove bearing frame.
–
Lift the camshaft
-1-
out of the cylinder head cover
-2-
.
Install
Note
Before fitting, moisten the camshaft and the camshaft bearings lightly with engine oil.
–
Place the camshaft
-1-
in the cylinder head cover
-2-
.
–
Insert the fixing bolt -T10414 - into the nuts of the camshaft and tighten the screw by hand.
–
Position the bearing frame onto the bearing surfaces of the camshaft.
The bearing frame is put into the correct position by means of the centering pins
-arrows-
.
–
Tighten the fixing screws to 8 Nm in the specified order
-1-
to
-10-
.
Install cylinder head cover
→ Chapter
.
Power unit
1,2/63; 77 kW TSI engine
Engine cylinder head, valve gear
Cylinder head - part 2 / moving_and_installing_cylinder_head_cover_and_camshaft/">Removing and installing cylinder head cover and camshaft
Removing and installing camshaft
Install cylinder head cover >
< Remove cylinder head cover