Superb
| Removing and installing V-ribbed belt |
| 1 - | 25 Nm |
| 2 - | AC generator |
| 3 - | 25 Nm |
| 4 - | Lever |
| q | for the tensioning roller |
| 5 - | Spacer |
| q | pay attention to correct installation position |
| 6 - | Tensioning pulley |
| q | for the V-ribbed belt |
| 7 - | Tensioning element |
| q | for the V-ribbed belt |
| 8 - | Compact holder |
| q | for the alternator, clamping element for V-ribbed belts, the viscous fan coupling and vane pump for the power-assisted steering. |
| q | with bearing bush for fan |
| q | removing and installing bearing bush → Chapter |
| 9 - | 45 Nm |
| q | observe the order of tightening up → Chapter |
| 10 - | 45 Nm |
| 11 - | Vane pump |
| q | for power-assisted steering |
| q | removing and installing → Chassis → Rep. Gr.48 |
| 12 - | Hollow screw, 50 Nm |
| 13 - | Sealing ring |
| q | replace |
| 14 - | Hydraulic pressure line |
| 15 - | Toothed belt gear |
| q | for vane pump |
| 16 - | Support |
| q | for the clamping element |
| 17 - | Toothed belt gear |
| q | for the visco fan coupling |
| 18 - | Visco fan coupling |
| q | removing and installing → Chapter |
| 19 - | 10 Nm |
