skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing toothed belt > < Removing and installing V-ribbed belt

Superb

Removing and installing V-ribbed belt
Removing and installing V-ribbed belt
  Note
Mark the direction of rotation with chalk or an indelible felt-tip pen before removing the V-ribbed belt. Reversing the rotation direction of already used belts may destroy them. Pay attention to the correct position of the V-ribbed belt in the belt pulley when installing it.
Removing
–  Put lock carrier in service position → Body Work → Rep. Gr.50.
–  Mark the rotation direction of the V-ribbed belt.
–  Remove V-ribbed belt for AC compressor → Heating, Air Conditioning → Rep. Gr.87.
   
–  Turn the tensioning pulley with a wrench in the -direction of the arrow-.
–  First of all take V-ribbed belt off generator belt pulley and then from the other belt pulleys.
Install
Installation occurs in reverse order to removal.
  Note
Pay attention to the correct position of the V-ribbed belt in the belt pulley when installing it.
–  Check smooth operation of V-ribbed belt while the engine is running.
  S13-0446

Removing and installing toothed belt > < Removing and installing V-ribbed belt