Yeti
| Summary of components of front bumper bracket |
| 1 - | 9 Nm |
| 2 - | Adjusting nut |
| 3 - | 30 Nm |
| 4 - | Temperature sensor |
| 5 - | Front bumper bracket |
| Removing: |
| – | Removing front bumper → Chapter. |
| – | Remove foam piece -6-. |
| – | Disconnect the plug from the temperature sensor. |
| – | Remove screws -1-. |
| – | Support the lock carrier in a suitable manner. |
| – | Remove screws -3-. |
| – | Remove front bumper bracket towards the front. |
| Installing: |
| – | Installation is carried out in the reverse order. |
| 6 - | Foam piece |