| Mounting instructions for signs and letterings |
| Special tools and workshop equipment required |
| t
| Hot-air blower e.g. -V.A.G 1416- |
| t
| Cleaning agent -D 009 401 04- |
| t
| Glue remover -D 002 000 10- |
Note | t
| Before removing, the lettering or the sign must be warmed up using a hot-air blower -V.A.G 1416-. |
| t
| The glue remover -D 002 000 10- must be used to remove the glue residues. |
| t
| Before the sign and the lettering are glued, the adhesive surfaces of the body must be cleaned with -D 009 401 04-. |
| t
| Make sure that the adhesive surfaces are free from dust and grease. |
| t
| The letterings or the signs must be glued immediately after cleaning with the cleaning agent -D 009 401 04-. |
| t
| Remove protective foil from its wrapping immediately before installing. |
| t
| The ambient temperature should be approx. 21°C when glueing the signs and letterings. |
|
|
|
