Yeti
| Repairing the brake caliper FS-III |
| t | Brake inspection → Chapter. |
| t | Install the complete repair set when undertaklng repairs. |
| t | Only use white spirits to clean the brakes. |
| t | Thinly coat brake cylinder, piston and gasket ring with lithium grease -G 052 150 A2-. |
| 1 - | Dust cap |
| q | place on the vent valve |
| 2 - | Bleeder screw, 10 Nm |
| q | thinly coat thread with lithium grease -G 052 150 A2- before screwing in |
| 3 - | Bushing |
| q | insert into the brake caliper |
| 4 - | Guide bolt, 30 Nm |
| 5 - | Caps |
| q | insert in bushing |
| 6 - | Brake caliper |
| 7 - | Sealing ring |
| q | removing and installing → Chapter |
| 8 - | Piston |
| q | removing and installing → Chapter |
| q | first thinly coat piston with lithium grease -G 052 150 A2- |
| 9 - | Protective cap |
| q | removing and installing → Chapter |
| q | do not damage when inserting the piston |