Yeti
| Bracket for auxiliary units with oil filter and engine oil cooler - Summary of components |
| 1 - | Bracket for auxiliary units |
| q | with integrated oil filter holder |
| q | removing and installing → Chapter |
| 2 - | Oil pressure switch -F22- |
| q | 0.215 - 0.295 MPa (2.15 - 2.95 bar) blue |
| q | check → Chapter |
| q | Tightening torque: 20 Nm |
| 3 - | Oil pressure switch for reduced oil pressure -F378- |
| q | 0.055 - 0.085 MPa (0.55 - 0.85 bar) brown |
| q | check → Chapter |
| q | Tightening torque: 20 Nm |
| 4 - | Gasket |
| q | replace |
| 5 - | O-ring |
| q | one part with valve unit |
| 6 - | O-ring |
| q | one part with valve unit |
| 7 - | Valve unit |
| q | with gasket O-rings |
| 8 - | Oil filter |
| q | removing and installing → BookletYeti |
| q | removing and installing with oil filter wrench, 22 Nm |
| 9 - | 15 Nm |
| 10 - | Supports |
| 11 - | Sealing ring |
| q | replace |
| 12 - | Engine oil cooler |
| q | pay attention to the notes → Chapter |
| q | ensure clearance to surrounding components |
| q | connection diagram for coolant hoses → Chapter |
| q | removing and installing → Chapter |
| 13 - | Gasket |
| q | replace |
| 14 - | 20 Nm + torque a further 90° (1/4 turn) |
| q | replace |
| q | order of tightening → Fig. |
