skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Testing oil pressure and oil pressure switch > < Bracket for auxiliary units with oil filter and engine oil cooler - Summary of components

Yeti

Removing and installing engine oil cooler
Removing and installing engine oil cooler
Removing
–  Remove the bracket for auxiliary units → Chapter.
   
–  Release screws -4 and 5- and remove engine oil cooler -3- with gasket -2-.
Install
Installation is carried out in the reverse order. However, pay attention to the following:
  Note
Always replace seals and gasket rings.
  A17-10228
–  Install engine oil cooler -3- with new gasket -2-.
   Tightening torques: → Chapter
–  Install the bracket for auxiliary units → Chapter.
  A17-10228

Testing oil pressure and oil pressure switch > < Bracket for auxiliary units with oil filter and engine oil cooler - Summary of components