| Electronic anti-theft coding |
| The radio system is equipped with Convenience electronic anti-theft lock, which operates in combination with the dash panel insert. |
| The radio systems are protected with an anti-theft code. |
| For radio systems mounted at the factory the safety code is only entered in the respective vehicle when it is first put into service The safety code does no longer have to be re-entered when subsequently disconnecting and re-connecting the battery or when removing and re-installing the radio system in the same vehicle. If the radio system is installed in another vehicle or the dash panel insert is replaced, the safety code must be entered again. |
| The radio systems in the vehicles are locked at the factory before delivery to the dealers. |
| Before the vehicle is handed over to the customer, the anti-theft code of the radio must be deactivated by entering a safety code. |
| The user must have a valid authorisation for the use of a programme to determine the radio coding. |
Note | t
| If an incorrect safety code is entered, it can be corrected immediately at the next attempt. If an incorrect safety code is entered once again, the radio is blocked for 1 hour. |
| t
| After one hour has elapsed, during which the radio as well as the ignition must remain switched on (the time which has elapsed since the lock was activated is shown in the display of the radio), the procedure for deactivating the electronic anti-theft coding can be repeated (always two attempts, then locked for one hour). |
|
|
|
