ACCELERATOR PEDAL - REMOVAL - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REMOVAL › ACCELERATOR PEDAL - REMOVAL - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
ACCELERATOR PEDAL - REMOVAL

1GD-FTV ENGINE CONTROL ACCELERATOR PEDAL REMOVAL
PROCEDURE
78110K
1.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY
NOTICE: This accelerator pedal does not require lubrication. Do not apply oil or other lubrication to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.
a.

*A for LHD *B for RHD
Disconnect the accelerator pedal sensor connector.
b. Remove the 2 nuts and accelerator pedal sensor assembly.
NOTICE:
· Avoid physical shocks to the accelerator pedal sensor assembly.
· Do not disassemble the accelerator pedal sensor assembly.
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.