CAUTION / NOTICE / HINT - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REMOVAL › CAUTION / NOTICE / HINT - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
CAUTION / NOTICE / HINT

BRAKE SYSTEM (OTHER) BRAKE BOOSTER(w/ ABS) REMOVAL
CAUTION / NOTICE / HINT
HINT:
· Use the same procedure for RHD and LHD vehicles.
· The procedure listed below is for LHD vehicles.
NOTICE: Make sure to release the vacuum from the brake booster before removing the brake master cylinder sub- assembly from the brake booster assembly. PROCEDURE
1.DRAIN BRAKE FLUID
NOTICE: Wash off brake fluid immediately if it comes in contact with any painted surface.
47101A
2.REMOVE BRAKE PEDAL RETURN SPRING
47264A
3.REMOVE PUSH ROD PIN
47264D
4.REMOVE BRAKE MASTER CYLINDER PUSH ROD CLEVIS
a. Loosen the push rod clevis lock nut.
b. Remove the brake master cylinder push rod clevis.
5.DISCONNECT VACUUM HOSE
a. except 1TR-FE, 2TR-FE: Slide the clip and disconnect the vacuum hose from the brake vacuum check valve assembly.
b. for 1TR-FE, 2TR-FE: Slide the clip and disconnect the 2 vacuum hoses from each brake vacuum check valve assembly.
47201
6.REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY
44610
7.REMOVE BRAKE BOOSTER ASSEMBLY
a. for Diesel:
i. Remove the brake vacuum check valve assembly from the brake booster assembly. ii. Remove the vacuum warning switch assembly from the brake booster assembly.
Parts & tools for this job For Toyota Hilux
- TOOLOBD2 scanner with ABSSearch: OBD2 scanner ABS SRS
- TOOLDigital multimeterSearch: automotive digital multimeter
As an Amazon Associate we earn from qualifying purchases.