41.REMOVE INJECTOR ASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REMOVAL (1) › 41.REMOVE INJECTOR ASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
41.REMOVE INJECTOR ASSEMBLY

40.REMOVE NO. 1 INJECTION PIPE SUB-ASSEMBLY AND NO. 2 INJECTION PIPE SUB-ASSEMBLY
23670
41.REMOVE INJECTOR ASSEMBLY
23682
42.REMOVE NOZZLE HOLDER GASKET
11301M
43.REMOVE CAMSHAFT POSITION SENSOR
11201
44.REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY
45.SET NO. 1 CYLINDER TO TDC/COMPRESSION
a.

*a Timing Mark *b Paint Mark
Align the timing mark of the crankshaft pulley and timing chain cover by rotating the crankshaft clockwise.
b. Make sure that the timing mark of the camshaft timing sprocket is at the top.
HINT: If the timing mark is not at the top, turn the crankshaft pulley 1 revolution so that the timing mark is at the top (set the No. 1 piston to TDC/compression).
Parts & tools for this job For Toyota Hilux
- PARTFuel filterSearch: Toyota Hilux fuel filter
- TOOLFuel pressure test kitSearch: fuel pressure test kit
- TOOLFuel line disconnect toolSearch: fuel line disconnect tool
As an Amazon Associate we earn from qualifying purchases.