CLOCK - INSPECTION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- INSPECTION › CLOCK - INSPECTION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
‹ Prev NO. 2 HEATER TO REGISTER DUCT SUB - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › CLOCK - INSTALLATION: METER / GAUGE / DISPLAY CLOCK INSTALLATION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
CLOCKCLOCK - INSPECTION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
CLOCK - INSPECTION

METER / GAUGE / DISPLAY CLOCK INSPECTION
CAUTION / NOTICE / HINT
HINT:
· Use the same procedure for RHD and LHD vehicles.
· The procedure listed below is for LHD vehicles.
PROCEDURE
83910G
1.INSPECT CLOCK ASSEMBLY
a. Check the illumination. Apply battery voltage to the connector and check the illumination condition. OK:

Component without harness connected *a (Clock Assembly)
Measurement Specified Condition Condition Battery positive (+) → Terminal 9 (ILL+) Illuminates Battery negative (-) → Terminal 6 (ILL-)
If the result is not as specified, replace the clock assembly.
‹ Prev NO. 2 HEATER TO REGISTER DUCT SUB - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › CLOCK - INSTALLATION: METER / GAUGE / DISPLAY CLOCK INSTALLATION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.