CLUTCH RELEASE CYLINDER - DISASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- DISASSEMBLY › CLUTCH RELEASE CYLINDER - DISASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
CLUTCH RELEASE CYLINDER - DISASSEMBLY

CLUTCH CLUTCH RELEASE CYLINDER DISASSEMBLY
PROCEDURE
1.REMOVE CLUTCH RELEASE CYLINDER KIT
a. Remove the clutch release cylinder boot together with the No. 1 clutch release cylinder push rod from the cylinder body.
b. Remove the No. 1 clutch release cylinder push rod from the clutch release cylinder boot.
c.

Using compressed air, remove the release cylinder piston together with the spring from the cylinder body.
NOTICE: Do not damage the inside of the cylinder body.
d. Remove the spring from the release cylinder piston.
e. Remove the 2 cylinder cups from the release cylinder piston.
2.REMOVE RELEASE CYLINDER BLEEDER PLUG
a. Remove the cylinder bleeder plug cap from the release cylinder bleeder plug.
b. Remove the release cylinder bleeder plug from the cylinder body.
Parts & tools for this job For Toyota Hilux
- PARTClutch kitSearch: Toyota Hilux clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Toyota Hilux manual gearbox oil
As an Amazon Associate we earn from qualifying purchases.