CLUTCH RELEASE CYLINDER - REASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › CLUTCH RELEASE CYLINDER - REASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
CLUTCH RELEASE CYLINDER - REASSEMBLY

CLUTCH CLUTCH RELEASE CYLINDER REASSEMBLY
PROCEDURE
1.INSTALL RELEASE CYLINDER BLEEDER PLUG
a. Install the release bleeder plug to the cylinder body. Torque:
11.8 N*m (120 kgf*cm, 9 ft.*lbf)
b. Install the bleeder plug cap to the bleeder plug.
2.INSTALL CLUTCH RELEASE CYLINDER KIT
a. Install 2 new cylinder cups to a new piston.
b.

Lithium soap base glycol grease
Apply lithium soap base glycol grease to the portions indicated by the arrows in the illustration.
c. Install a new spring to the piston.
d. Install the release cylinder piston together with the spring to the cylinder body.
NOTICE: Do not damage the inside of the cylinder body.
e. Install the No. 1 clutch release cylinder push rod to the clutch cylinder boot.
f. Install the clutch release cylinder boot together with the No. 1 clutch release cylinder push rod to the release cylinder body.
Parts & tools for this job For Toyota Hilux
- PARTClutch kitSearch: Toyota Hilux clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Toyota Hilux manual gearbox oil
As an Amazon Associate we earn from qualifying purchases.