COMBINATION METER - DISASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- DISASSEMBLY › COMBINATION METER - DISASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
‹ Prev COMBINATION METER - COMPONENTS - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › COMBINATION METER - INSTALLATION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
COMBINATION METERCOMBINATION METER - DISASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
COMBINATION METER - DISASSEMBLY

METER / GAUGE / DISPLAY COMBINATION METER DISASSEMBLY
CAUTION / NOTICE / HINT
HINT:
· Use the same procedure for RHD and LHD vehicles.
· The procedure listed below is for LHD vehicles.
NOTICE: Do not allow any dirt (fingerprints, grease, etc.) to adhere to the meter glass. If the glass is dirty, wipe it clean with a soft cloth. PROCEDURE
83138G
1.REMOVE COMBINATION METER GLASS
a. Using a screwdriver, detach the claw and remove the combination meter glass.

HINT: Tape the screwdriver tip before use.
*a Protective Tape
‹ Prev COMBINATION METER - COMPONENTS - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › COMBINATION METER - INSTALLATION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.