COMMON RAIL - INSPECTION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- INSPECTION › COMMON RAIL - INSPECTION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
COMMON RAIL - INSPECTION

1GD-FTV FUEL COMMON RAIL INSPECTION
PROCEDURE
23810A
1.INSPECT COMMON RAIL ASSEMBLY
a.

Component without harness connected *a (Fuel Pressure Sensor)
Inspect the fuel pressure sensor.
i. Measure the resistance according to the value(s) in the table below. Standard Resistance:
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 5 (PR) - 4 (E2) | 25°C (77°F) | 16.4 kΩ or less |
| 2 (PR2) - 3 (E2S) | 16.4 kΩ or less | |
| 6 (VC) - 5 | 3 kΩ or less | |
| 6 (VC) - 5 (PR) | 3 kΩ or less | |
| 1 (VCS) - 2 (PR2) | 3 kΩ or less |
If the result is not as specified, replace the common rail assembly.
b. Inspect the pressure discharge valve.
i. Measure the resistance according to the value(s) in the table below. Standard Resistance:
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | 20°C (68°F) | 0.42 to 0.52 Ω |
HINT: The temperature indicated in "Condition" is the temperature of the pressure discharge valve. If the result is not as specified, replace the common rail assembly.
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.