9.INSPECT REVERSE SYNCHRONIZER RING - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- INSPECTION › 9.INSPECT REVERSE SYNCHRONIZER RING - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
9.INSPECT REVERSE SYNCHRONIZER RING
Using a feeler gauge, measure the clearance between the No. 2 synchronizer ring set and countershaft 2nd speed gear. Standard clearance:
0.88 to 1.72 mm (0.0347 to 0.0677 in.) Minimum clearance:
0.88 mm (0.0347 in.) If the clearance is less than the minimum, replace the No. 2 synchronizer ring set.
b. Coat the countershaft 2nd speed gear cone with gear oil.
c.

Check the braking effect of the No. 2 synchronizer ring set.
i. Turn the synchronizer ring in both directions while pushing it against the countershaft 2nd speed gear cone. Check that the ring locks in both directions. If the No. 2 synchronizer ring set turns, replace it.
33387A
9.INSPECT REVERSE SYNCHRONIZER RING
a.

Using a feeler gauge, measure the clearance between the No. 2 synchronizer ring set and countershaft 2nd speed gear. Standard clearance:
0.65 to 1.35 mm (0.0256 to 0.0531 in.) Minimum clearance:
0.65 mm (0.0256 in.) If the clearance is less than the minimum, replace the reverse synchronizer ring.
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.