4.REMOVE VALVE STEM OIL SEAL - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- DISASSEMBLY › 4.REMOVE VALVE STEM OIL SEAL - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
4.REMOVE VALVE STEM OIL SEAL

Using SST and wooden blocks, compress the valve compression spring and remove the valve spring retainer locks from the valve spring retainer. SST 09202-70020 09202-00021
b. Remove the valve spring retainer, valve compression spring and exhaust valve from the cylinder head sub- assembly.
HINT: Arrange the removed parts in the correct order.
13711E
4.REMOVE VALVE STEM OIL SEAL
a.

Using needle-nose pliers, remove the valve stem oil seals from the valve guide bush.
13734A
5.REMOVE VALVE SPRING SEAT
a.

Using compressed air and a magnet hand, remove the valve spring seat from the cylinder head sub- assembly by blowing air onto it.
11117E
6.REMOVE NO. 1 STRAIGHT SCREW PLUG WITH HEAD
Parts & tools for this job For Toyota Hilux
- PARTEngine gasket setSearch: Toyota Hilux engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.