WHEN USING GTS - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- PRECAUTION › WHEN USING GTS - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
WHEN USING GTS

· By performing "Pilot Quantity Learning", the injection volume for each cylinder is precisely adjusted so that the engine runs smoothly. The "Pilot Quantity Learning" information is stored in the EEPROM of the ECM.
· If an incorrect pilot quantity learning value is input into the ECM, the engine may rattle or engine idling may become rough.
a. When an injector assembly is replaced, the injector compensation code must be input to the ECM, and then pilot quantity learning must be performed.
b. When the ECM is replaced, all of the existing injector pilot quantity learning values must be input into the new ECM.
WHEN USING GTS
CAUTION: Observe the following items for safety reasons:
· Before using the GTS, read the instruction manual.
· Prevent the GTS cable from being caught on the pedals, shift lever or steering wheel when driving with the GTS connected to the vehicle.
· When driving the vehicle for testing purposes using the GTS, 2 persons are required. One drives the vehicle, and the other operates the GTS.
IGNITION SWITCH EXPRESSIONS
HINT: The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch (Position) | Engine Switch (Condition) |
|---|---|---|
| Ignition Switch off | LOCK | Off (Lock) |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | On (Start) |
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.