5.REMOVE TURBO PRESSURE SENSOR - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REMOVAL › 5.REMOVE TURBO PRESSURE SENSOR - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
5.REMOVE TURBO PRESSURE SENSOR

b. Remove the gas filter from the gas filter bracket.
89421C
5.REMOVE TURBO PRESSURE SENSOR
a.

Disconnect the connector from the turbo pressure sensor.
b. Remove the bolt and turbo pressure sensor from the No. 3 water by-pass pipe sub-assembly.
44763C
6.REMOVE NO. 2 HOSE TO HOSE TUBE
a.

Slide the clamp to disconnect the union to connector tube hose from the No. 1 hose to hose tube.
b. Slide the clamp to disconnect the union to check valve hose from the vacuum pump assembly.
c. Remove the 2 bolts and No. 2 hose to hose tube from the cylinder head cover sub-assembly and hose bracket.
12632
7.REMOVE NO. 2 ENGINE COVER BRACKET
Parts & tools for this job For Toyota Hilux
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
As an Amazon Associate we earn from qualifying purchases.