41.REMOVE REAR END PLATE - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REMOVAL › 41.REMOVE REAR END PLATE - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
‹ Prev a. w/ Viscous Heater: Remove the 4 bolts, viscous heater - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › ENGINE ASSEMBLY - REMOVAL: 43.REMOVE ENGINE ASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
ENGINE ASSEMBLY41.REMOVE REAR END PLATE - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
41.REMOVE REAR END PLATE

d.

for Manual Transmission: Remove the 8 bolts and flywheel sub-assembly from the crankshaft.
e.

for Automatic Transmission: Remove the 8 bolts, rear drive plate spacer, pump impeller drive plate and flywheel sub-assembly from the crankshaft.
11355
41.REMOVE REAR END PLATE
a.

Remove the bolt and rear end plate from the cylinder block sub-assembly.
42.INSTALL ENGINE HANGER
‹ Prev a. w/ Viscous Heater: Remove the 4 bolts, viscous heater - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › ENGINE ASSEMBLY - REMOVAL: 43.REMOVE ENGINE ASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
Parts & tools for this job For Toyota Hilux
- PARTEngine gasket setSearch: Toyota Hilux engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.