80.REMOVE CAMSHAFT OIL SEAL RETAINER - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REMOVAL › 80.REMOVE CAMSHAFT OIL SEAL RETAINER - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
‹ Prev 75.REMOVE THERMOSTAT - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › a. Remove the bolt and No. 1 water hose clamp bracket from - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
ENGINE UNIT80.REMOVE CAMSHAFT OIL SEAL RETAINER - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
80.REMOVE CAMSHAFT OIL SEAL RETAINER

a.

Remove the 3 bolts and vacuum pump assembly from the cylinder head sub-assembly.
b. Remove the 2 O-rings from the vacuum pump assembly.
11382C
80.REMOVE CAMSHAFT OIL SEAL RETAINER
a.

Remove the camshaft oil seal retainer from the No. 3 camshaft bearing cap and cylinder head sub- assembly.
81.REMOVE VISCOUS HEATER CRANKSHAFT PULLEY (w/ Viscous Heater) 88451B
13496
82.REMOVE CRANKSHAFT PULLEY COVER
13471
83.REMOVE CRANKSHAFT PULLEY
16575C
84.REMOVE NO. 1 WATER HOSE CLAMP BRACKET (w/ DPF)
‹ Prev 75.REMOVE THERMOSTAT - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › a. Remove the bolt and No. 1 water hose clamp bracket from - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
Parts & tools for this job For Toyota Hilux
- PARTEngine gasket setSearch: Toyota Hilux engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
As an Amazon Associate we earn from qualifying purchases.