MIL TURNS - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- SYSTEM DESCRIPTION › MIL TURNS - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
MIL TURNS

| Fuel system | Incorrect fuel injection timing · |
|---|---|
| EGR valve | Stuck or does not close completely |
| Diesel throttle | Stuck or does not move smoothly |
| Exhaust system | Clogging of exhaust line |
HINT:
· The components listed above are only the main ones. Not all the components potentially related to lack of power and hesitation are listed. For details regarding the troubleshooting of lack of power and hesitation, refer to the flowchart "Lack of Power or Hesitation" (Click hereEngine / Hybrid System>1GD-FTV ENGINE CONTROL>ECD SYSTEM>Lack of Power or Hesitation).
· If obvious malfunction (lack of power) has not been reproduced, perform test driving another vehicle, which is the same model and has the same engine, and compare the engine conditions and performance. If a great difference is not present in engine performance, explain to the customer that lack of power the customer mentioned is not abnormal.
c. Relation between Turbocharger and Abnormal Boost Pressure: If the boost pressure is lower than normal due to a turbocharger sub-assembly failure, lack of power could occur due to an intake air volume shortage. However, abnormal boost pressure can be caused by the failure of various components such as intake lines, the EGR valve, etc. Therefore, do not assume that the turbocharger sub-assembly is the cause of abnormal boost pressure, but check all the components possibly related to abnormal boost pressure. Components related to abnormal boost pressure are shown in a chart listed in the On-vehicle Inspection for Intake System (Click here Engine / Hybrid System>1GD-FTV INTAKE / EXHAUST>INTAKE SYSTEM>ON-VEHICLE INSPECTION). For simple and effective troubleshooting, refer to the chart before starting troubleshooting.
MIL TURNS ON
If a DTC related to a turbocharger sub-assembly malfunction is stored, refer to the troubleshooting section for each DTC (Click hereEngine / Hybrid System>1GD-FTV ENGINE CONTROL>ECD SYSTEM>DIAGNOSTIC TROUBLE
CODE CHART).
BRIEF OUTLINE OF TURBOCHARGER OPERATION AND CONSTRUCTION
a. A turbocharger is a component used to supply a larger air volume to the cylinders by recovering exhaust gas energy using a turbine coaxially connected to a compressor.
b. Principle of Turbocharging: Boost pressure is proportional to turbocharger speed, because the intake air is accelerated by centrifugal force generated by the rotation of the compressor and the increased kinetic energy, i.e. the velocity of the intake air, is converted to pressure energy by the diffuser located around the outlet of the compressor impeller. The compressor is driven by the turbine connected coaxially by the turbine shaft. The turbine is driven by exhaust gas energy. Therefore, when the turbocharger begins boosting the intake air, a larger air volume is supplied to the cylinders and more fuel can be injected. As a result, more exhaust energy will be available and the turbocharger boost increases.
Parts & tools for this job For Toyota Hilux
- PARTExhaust gasketSearch: Toyota Hilux exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
As an Amazon Associate we earn from qualifying purchases.