2.INSTALL TAILPIPE ASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- INSTALLATION › 2.INSTALL TAILPIPE ASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
2.INSTALL TAILPIPE ASSEMBLY

c.

*1 Gasket *a Wooden Block
Using a plastic-faced hammer and wooden block, tap on a new gasket until its surface is flush with the exhaust manifold converter sub-assembly.
d. Install the front exhaust pipe assembly and 2 compression springs with the 2 bolts. Alternately tighten the bolts in several passes. Torque: 43 N*m (438 kgf*cm, 32 ft.*lbf)
17430
2.INSTALL TAILPIPE ASSEMBLY
a. Install the tailpipe assembly to the 4 exhaust pipe supports.
b. Install a new gasket and connect the tailpipe to the front exhaust pipe assembly with the 2 bolts and 2 new nuts. Alternately tighten the bolts in several passes. Torque: 43 N*m (438 kgf*cm, 32 ft.*lbf)
NOTICE: Do not reuse the gasket.
3.INSPECT FOR EXHAUST GAS LEAK
If gas is leaking, tighten the problem areas to stop the leak. Replace damaged parts as necessary.
Parts & tools for this job For Toyota Hilux
- PARTExhaust gasketSearch: Toyota Hilux exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
As an Amazon Associate we earn from qualifying purchases.