26.INSTALL SCREW GROMMET - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 26.INSTALL SCREW GROMMET - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
26.INSTALL SCREW GROMMET

26.INSTALL SCREW GROMMET

a. Attach the claw to install 2 new screw grommets.
67832
27.INSTALL FRONT DOOR SERVICE HOLE COVER LH
a. Apply new butyl tape to the front door panel.
b. Pass the front door inside locking cable assembly LH and front door lock remote control cable assembly LH through a new front door service hole cover LH, and then attach the front door service hole cover LH using the reference points on the front door panel.
HINT:
· Securely install the front door service hole cover LH to prevent wrinkles and air bubbles.
· There should be no wrinkles or folds after installing the front door service hole cover LH.
· After installing the front door service hole cover LH, check the seal quality.
c. Attach the clamp.
d. w/ Power Mirror Control System: Attach the clamp.
e. w/ Curtain Shield Airbag: Install the ground wire with the ground bolt.
Parts & tools for this job For Toyota Hilux
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Toyota touch up paint
- PARTPanel clip assortmentSearch: Toyota panel clips assortment
As an Amazon Associate we earn from qualifying purchases.