6.INSTALL INBOARD JOINT - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 6.INSTALL INBOARD JOINT - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
6.INSTALL INBOARD JOINT

6.INSTALL INBOARD JOINT
a.

*1 Front Axle Inboard Joint Boot Clamp *2 Inboard Joint Boot *3 Front No. 2 Axle Inboard Joint Boot Clamp *a Protective Tape
Outboard Joint Side
Inboard Joint Side
Install new parts to the front drive outboard joint assembly in the following order.
i. Front axle inboard joint boot clamp ii. Inboard joint boot iii. Front No. 2 axle inboard joint boot clamp
b. Remove the protective tape from the front drive outboard joint assembly.
c.

*a Matchmark
Align the matchmarks and place the beveled side of the tripod joint axial spline toward the front drive outboard joint assembly.
Parts & tools for this job For Toyota Hilux
- PARTFront wheel bearingSearch: Toyota Hilux front wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Toyota Hilux cv boot kit
As an Amazon Associate we earn from qualifying purchases.