6.INSPECT TOE-IN - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- ADJUSTMENT › 6.INSPECT TOE-IN - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
6.INSPECT TOE-IN


*1 No. 1 Camber Adjusting Cam (LH) *2 No. 1 Camber Adjusting Cam (RH) *3 No. 2 Camber Adjusting Cam (LH) *4 No. 2 Camber Adjusting Cam (RH) *a Front of the Vehicle - -
HINT:
· Moving the No. 1 camber adjusting cam to (+) side by one notch changes the caster by approximately +0°07' and the camber by approximately +0°03'.
· Moving the No. 2 camber adjusting cam to (+) side by one notch changes the caster by approximately +0°06' and the camber by approximately +0°04'.
· Perform adjustments so that the value is as close as possible to the median of the specified range.
d. Tighten the camber adjusting cam nut and camber adjusting cam bolt. Torque: 185 N*m (1886 kgf*cm, 136 ft.*lbf)
6.INSPECT TOE-IN

Front of the Vehicle
Parts & tools for this job For Toyota Hilux
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Toyota power steering fluid
As an Amazon Associate we earn from qualifying purchases.