FUEL SUPPLY PUMP - INSPECTION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- INSPECTION › FUEL SUPPLY PUMP - INSPECTION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
‹ Prev Tightening torque for "Major areas involving basic vehicle - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › FUEL SUPPLY PUMP - INSTALLATION: 1GD-FTV FUEL FUEL SUPPLY PUMP - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
FUEL SUPPLY PUMPFUEL SUPPLY PUMP - INSPECTION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
FUEL SUPPLY PUMP - INSPECTION

1GD-FTV FUEL FUEL SUPPLY PUMP INSPECTION
PROCEDURE
22100
1.INSPECT SUPPLY PUMP ASSEMBLY
a. Inspect the pre-stroke control valve assembly.
i. Measure the resistance according to the value(s) in the table below. Standard Resistance:
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | 20°C (68°F) | 0.42 to 0.52 Ω |
HINT: The temperature indicated in "Condition" is the temperature of the pre-stroke control valve. If the result is not as specified, replace the supply pump assembly.
‹ Prev Tightening torque for "Major areas involving basic vehicle - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › FUEL SUPPLY PUMP - INSTALLATION: 1GD-FTV FUEL FUEL SUPPLY PUMP - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.