Tester Specified Tester Connection Condition Specified - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- INSPECTION › Tester Specified Tester Connection Condition Specified - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
‹ Prev GENERATOR - INSPECTION: b. Check the generator rotor assembly for an - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › WIRING DIAGRAM - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
GENERATORTester Specified Tester Connection Condition Specified - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
Tester Specified Tester Connection Condition Specified
| Tester | Specified | |
|---|---|---|
| Tester Connection | Condition | Specified Condition |
| Slip ring - Rotor core | Always | 10 kΩ or higher |
If the result is not as specified, replace the generator rotor assembly.
d. Check each slip ring.
i. Check that the slip rings are not rough or scored. If the slip rings are rough or scored, replace the generator rotor assembly. ii. Using a vernier caliper, measure the slip ring diameter. Standard diameter:

14.2 to 14.8 mm (0.559 to 0.583 in.) Minimum diameter:
14.0 mm (0.551 in.) If the diameter is less than the minimum, replace the generator rotor assembly.
‹ Prev GENERATOR - INSPECTION: b. Check the generator rotor assembly for an - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › WIRING DIAGRAM - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
Parts & tools for this job For Toyota Hilux
- TOOLBattery testerSearch: car battery tester
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBattery terminal cleanerSearch: battery terminal cleaner
As an Amazon Associate we earn from qualifying purchases.