6.INSPECT 5TH GEAR RADIAL CLEARANCE - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- DISASSEMBLY › 6.INSPECT 5TH GEAR RADIAL CLEARANCE - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
6.INSPECT 5TH GEAR RADIAL CLEARANCE
a.

Using a feeler gauge, measure the 5th gear thrust clearance. Standard clearance:
0.150 to 0.410 mm (0.0060 to 0.0161 in.) If the clearance is outside the specification, replace the 5th gear, thrust washer, clutch hub or shaft.
HINT: Replace the part or parts determined to be the most likely cause of the problem.
33336
6.INSPECT 5TH GEAR RADIAL CLEARANCE
a.

Using a dial indicator, measure the 5th gear radial clearance. Standard clearance:
0.013 to 0.054 mm (0.0006 to 0.0021 in.) If the clearance is outside the specification, replace the 5th gear, thrust washer, clutch hub or shaft.
HINT: Replace the part or parts determined to be the most likely cause of the problem.
33362A
7.REMOVE NO. 2 CLUTCH HUB SETTING SHAFT SNAP RING
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.