12.INSTALL 6TH GEAR SUB-ASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 12.INSTALL 6TH GEAR SUB-ASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
12.INSTALL 6TH GEAR SUB-ASSEMBLY

a.

*a Protrusion *b Groove
Coat the No. 3 synchronizer ring with gear oil, and then install it to the No. 3 transmission clutch hub.
NOTICE: Align the protrusion of the No. 3 synchronizer ring with the groove of the No. 3 transmission clutch hub.
33337
12.INSTALL 6TH GEAR SUB-ASSEMBLY
a.

Coat the 6th gear sub-assembly with gear oil, and then install it to the input shaft.
HINT: Make sure that the 6th gear sub-assembly faces the correct direction as shown in the illustration.
b. Check that the 6th gear sub-assembly and No. 3 synchronizer ring move smoothly.
33342A
13.INSTALL GEAR THRUST WASHER STRAIGHT PIN
a.

Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.