INTRUSION SENSOR - PRECAUTION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- PRECAUTION › INTRUSION SENSOR - PRECAUTION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
INTRUSION SENSOR - PRECAUTION
THEFT DETERRENT / KEYLESS ENTRY INTRUSION SENSOR PRECAUTION
PRECAUTIONS DURING REPLACEMENT
NOTICE: When replacing electronic parts, if there is a possibility that your body may contact a circuit board, etc., use the recommended tools and observe all precautions to prevent damage to the system by electrostatic discharge (ESD).
a. Procedures where static electricity countermeasures are necessary:
i. Theft warning radar sensor replacement. ii. Internal wiring connection/disconnection, inspection and replacement.
b. Precautions during procedures:
i. Before performing any procedures, touch an unpainted metal part or ground bolt of the vehicle to eliminate any static electricity. ii. To prevent damage to electrical equipment, disconnect the battery power supply before removing or installing electrical equipment. iii. Never touch a circuit board's electronic parts, or an integrated circuit's pins. iv. When performing procedures, do not allow clothing to come near or contact parts.
Parts & tools for this job For Toyota Hilux
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
As an Amazon Associate we earn from qualifying purchases.