3.REMOVE TAIL GATE MARK - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REMOVAL › 3.REMOVE TAIL GATE MARK - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
3.REMOVE TAIL GATE MARK


*a Wooden Block
Protective Tape
75459
3.REMOVE TAIL GATE MARK
HINT: When removing the tail gate mark, heat the vehicle body and tail gate mark using a heat light. Standard:
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Tail Gate Mark | 20 to 30°C (68 to 86°F) |
CAUTION:

· Do not touch the heat light and heated parts.
· Touching the heat light may result in burns.
· Touching heated parts for a long time may result in burns.
a. Put protective tape around the tail gate mark.
b. Insert piano wire between the vehicle body and tail gate mark.
c. Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
*a Heated Part
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.