NAVIGATION ANTENNA - INSPECTION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- INSPECTION › NAVIGATION ANTENNA - INSPECTION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
NAVIGATION ANTENNA - INSPECTION

NAVIGATION / MULTI INFO DISPLAY NAVIGATION ANTENNA INSPECTION
PROCEDURE
86860
1.INSPECT NAVIGATION ANTENNA ASSEMBLY
a. Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Specified Condition Connection Condition 1 - 2 Always 50 to 500 Ω

If the result is not as specified, replace the navigation antenna assembly.
Component without harness connected *a (Navigation Antenna Assembly)
86808A
2.INSPECT NO. 2 NAVIGATION ANTENNA CORD SUB-ASSEMBLY
a. Measure the resistance according to the value(s) in the table below.

Component without harness connected *a - - (No. 2 Navigation Antenna Cord Sub-assembly)
Standard Resistance: Tester Specified Condition Connection Condition A-1 - B-1 Always Below 1 Ω A-2 - B-2 Always Below 1 Ω
If the result is not as specified, replace the No. 2 navigation antenna cord sub-assembly.
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.