OIL PRESSURE SWITCH - INSPECTION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- INSPECTION › OIL PRESSURE SWITCH - INSPECTION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
‹ Prev OIL PRESSURE SWITCH - COMPONENTS - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › OIL PRESSURE SWITCH - INSTALLATION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
OIL PRESSURE SWITCHOIL PRESSURE SWITCH - INSPECTION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
OIL PRESSURE SWITCH - INSPECTION

1GD-FTV LUBRICATION OIL PRESSURE SWITCH INSPECTION
PROCEDURE
83530
1.INSPECT ENGINE OIL PRESSURE SWITCH ASSEMBLY
a. Disconnect the engine oil pressure switch connector.
b. Start the engine.
c. Measure the resistance according to the value(s) in the table below. Standard Resistance:
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - Body ground | Engine stopped | Below 1 Ω |
| Engine idling | 10 kΩ or higher |
If the result is not as specified, replace the engine oil pressure switch assembly.
d. Connect the engine oil pressure switch connector.
‹ Prev OIL PRESSURE SWITCH - COMPONENTS - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › OIL PRESSURE SWITCH - INSTALLATION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
Parts & tools for this job For Toyota Hilux
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
As an Amazon Associate we earn from qualifying purchases.