15.REMOVE FAN SHROUD - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REMOVAL › 15.REMOVE FAN SHROUD - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
15.REMOVE FAN SHROUD
16711
15.REMOVE FAN SHROUD
a.

Detach the 6 wire harness clamps.
b.

Loosen the 4 nuts holding the fan with fluid coupling assembly.
c. Remove the fan and generator V belt.
d.

Detach the 2 claws and 2 guides to disconnect the fan shroud from the radiator assembly.
e. Remove the 4 nuts of the fan with fluid coupling assembly and remove the fan shroud together with the fluid coupling assembly.
NOTICE: Do not allow the radiator assembly to interfere with other parts.
f. Remove the fan pulley from the engine water pump assembly.
Parts & tools for this job For Toyota Hilux
- FLUIDCoolantSearch: Toyota coolant antifreeze
- PARTThermostatSearch: Toyota Hilux thermostat
- TOOLCooling system pressure testerSearch: cooling system pressure tester
As an Amazon Associate we earn from qualifying purchases.