COMBINATION METER ASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- .pdf › COMBINATION METER ASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
‹ Prev ground*8 Door control switch (power window regulator master - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › Body ground W-B - Body ground Ground Always Below 1 ? Body - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
TERMINALS OF ECUCOMBINATION METER ASSEMBLY - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
COMBINATION METER ASSEMBLY
| No moving object | ||||
|---|---|---|---|---|
| G28-12 (ISIF) - Body ground*10 | L - Body ground | Intrusion sensor (theft warning ultrasonic sensor) signal input | No moving object detected by sensor during arming preparation state or armed state | 11 to 14 V |
| Moving object detected by sensor during arming preparation state or armed state | Pulse generation |
*1: w/o Entry and Start System *2: w/ Entry and Start System *3: for RHD and for 1GD-FTV, 2GD-FTV *4: except *3 *5: w/ Security Horn Assembly *6: w/ Theft Warning Siren Assembly *7: w/o Door Control Battery *8: w/ Door Control Battery *9: w/ Double Locking *10: w/ Intrusion Sensor
COMBINATION METER ASSEMBLY

a. Measure the voltage, resistance and check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G9-19 (+S) - Body ground | V - Body ground | Speed signal for other system (Output) | Driving at approximately 20 km/h (12 mph) | Pulse generation (See waveform) |
| G10-12 (DOOR) - Body ground | Y - Body ground | Door courtesy switch signal except driver door | All doors closed except driver door | 11 to 14 V |
| Any door open except driver door | Below 1 V | |||
| G10-15 (DCTY) - Body ground | B - Body ground | Driver side door condition signal | Driver side door closed | 11 to 14 V |
| Driver side door open | Below 1 V | |||
| G10-16 (PCTY) - Body ground | G - Body ground | Front passenger side door condition signal | Front passenger side door closed | 11 to 14 V |
| Front passenger side door open | Below 1 V | |||
| G10-17 (RLCY) - Body ground*1 | V - Body ground | Rear door LH condition signal | Rear door LH closed | 11 to 14 V |
| Rear door LH open | Below 1 V | |||
| G9-18 (RRCY) - Body ground*1 | L - Body ground | Rear door RH condition signal | Rear door RH closed | 11 to 14 V |
| Rear door RH open | Below 1 V | |||
| G10-20 (GND) - | ||||
| tamanuals.com.au | ux-service-repair-manual-jul | l-15-current/N00148/manua | P 0000TF8B.html |
‹ Prev ground*8 Door control switch (power window regulator master - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › Body ground W-B - Body ground Ground Always Below 1 ? Body - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.