THERMOSTAT - INSPECTION: 1GD-FTV COOLING THERMOSTAT INSPECTION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- INSPECTION › THERMOSTAT - INSPECTION: 1GD-FTV COOLING THERMOSTAT INSPECTION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
‹ Prev THERMOSTAT - COMPONENTS - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › c. Check the valve lift. Standard valve lift: 10 mm (0.394 - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
THERMOSTATTHERMOSTAT - INSPECTION: 1GD-FTV COOLING THERMOSTAT INSPECTION - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
THERMOSTAT - INSPECTION: 1GD-FTV COOLING THERMOSTAT INSPECTION

1GD-FTV COOLING THERMOSTAT INSPECTION
PROCEDURE
16331A
1.INSPECT THERMOSTAT
HINT:

The valve opening temperature is inscribed on the thermostat.
a. Immerse the thermostat in water and then gradually heat the water.
CAUTION:

· Do not your hands into the water that has been heated for the inspection.
· Touching the heated water could result in burns.
b. Check the valve opening temperature. Standard valve opening temperature: 80 to 84°C (176 to 183°F) If the valve opening temperature is not within the specified range, replace the thermostat.
‹ Prev THERMOSTAT - COMPONENTS - Toyota Hilux AN120/AN130 2015-2018 Workshop ManualNext › c. Check the valve lift. Standard valve lift: 10 mm (0.394 - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
Parts & tools for this job For Toyota Hilux
- FLUIDCoolantSearch: Toyota coolant antifreeze
- PARTThermostatSearch: Toyota Hilux thermostat
- TOOLCooling system pressure testerSearch: cooling system pressure tester
As an Amazon Associate we earn from qualifying purchases.