SYSTEM>SYSTEM DIAGRAM - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- INSPECTION › SYSTEM>SYSTEM DIAGRAM - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
SYSTEM>SYSTEM DIAGRAM

HINT:
· When inspecting the transfer shift actuator assembly, refer to the wiring diagram.
SYSTEM>SYSTEM DIAGRAM
· When performing the operation described above, use the DEF relay.
i. Check the 2WD to 4WD HIGH switch. Connect lines via a relay as shown in the illustration, then check that the actuator fork moves from the 2WD to 4WD HIGH position.

*1 DEF Relay - - Component without harness connected *a 2WD to 4WD HIGH *b (Transfer Shift Actuator Assembly)
1. After the 2WD to 4WD HIGH switch is complete, inspect the 4WD detection switch, L4 detection switch and limit switch. Standard Resistance: Tester Switch Specified Connection Condition Condition After 2WD to 3 (TL1) - 6
4WD HIGH
10 kΩ or (GND1) switch is higher complete After 2WD to 4 (TL2) - 6
4WD HIGH
10 kΩ or (GND1) switch is higher complete After 2WD to 5 (TL3) - 6
4WD HIGH
Below 1 Ω (GND1) switch is complete After 2WD to 9 (L4) - 6
4WD HIGH
10 kΩ or (GND1) switch is higher complete After 2WD to
4WD HIGH
12 (B) - 10 Below 1 Ω switch is (GND)
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.