31.INSTALL ACTUATOR BREATHER HOSE - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- REASSEMBLY › 31.INSTALL ACTUATOR BREATHER HOSE - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
31.INSTALL ACTUATOR BREATHER HOSE

b.

Install the transfer case cover sub-assembly with the 4 bolts. Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf)
31.INSTALL ACTUATOR BREATHER HOSE
a.

*a 0 to 3.0 mm
Install the 2 clamps and actuator breather hose as shown in the illustration.
NOTICE:
· Install the actuator breather hose so that it passes between the rear transfer case and transfer shift actuator assembly.
· Fully install the actuator breather hose to the base of the transfer shift actuator assembly.
· Install the actuator breather hose so that the net protector in area A extends 0 to 3.0 mm (0 to
0.118 in.) from the clamp.
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.