SteeringTechnical Data - Recommended Torque Values- Steering
Recommended Torque Values
|
|
Nm |
|
Airbag unit to steering wheel |
8 |
|
Expandable hose to power steering pump |
28 |
|
Pressure line to power steering pump |
28 |
|
Pressure and return line to steering gear |
28 |
|
Steering gear holder to bulkhead |
22 1) |
|
Retaining clamp for fluid reservoir |
4 |
|
Retaining shackle to engine block (DOHC engines) |
18 |
|
Retaining shackle to engine block (OHC engines) |
20 |
|
Retaining shackle to power steering pump (DOHC-Motor) |
18 |
|
Retaining shackle to power steering pump (OHC-Motor) |
20 |
|
Bracket to power steering pump (X 17 DTL, RHD/India version) |
16 |
1) Cut back thread and fit fixing bolts with locking material.
Recommended Torque Values (Continued)
|
|
Nm |
|
Oil reservoir holder to battery carrier and front frame |
7 |
|
Power steering pump holder to support |
25 |
|
Power steering pump bracket to support (X 17 DTL, RHD/India version) |
16 |
|
Clamping flange to tie rod |
20 |
|
Steering wheel to steering shaft |
20 |
|
Steering pinion to steering coupling |
22 |
|
Steering spindle to steering coupling |
22 |
|
Steering shaft to steering column holder connection slots |
22 |
|
Steering shaft with holder to bulkhead |
22 |
|
Power steering pump to support (vehicle with ribbed V-belts-DOHC-Motor) |
25 |
|
Power steering pump to support (vehicle with ribbed V-belts-OHC-Motor) |
20 |
Recommended Torque Values (Continued)
|
|
Nm |
|
Power steering pump to cylinder block (vehicles up to 1.6 I capacity with V-belts) |
30 |
|
Belt pulley to power steering pump |
25 |
|
Pinion fixing to steering gear |
40 |
|
Hexagonal locking nut for adjustment screw |
60 |
|
Tensioning bolt to power steering pump |
40 |
|
Tensioning piece to support |
25 |
|
Tie rod to steering gear |
95 |
|
Tie rod end to tie rod lever |
60 1) |
|
Strut to compressor |
35 |
|
Strut to transmission |
40 |
|
Underride protection to front axle body |
20 |
|
|
12 Steering & suspension
