Tie-rods, remove and install (Steering Linkage)

Make

Vauxhall

Model

Astra F

Section

Steering Linkage › Repair Instructions › Tie-rods, remove and install

SteeringTie-rods, remove and install

Steering Linkage   Tie Rods, Remove and Install     Remove, Disconnect    Release the tie rod clamping flange. Unbolt tie rod from steering gear. Unbolt tie rod from the adjustment bolts - previously measure the screwed depth.     Install, Connect    Turn new tie rod (with new damping bushing) onto adjusting bolts. Note left or right version.   Install tie rod on steering gear - tightening torque 95 Nm/70 lbf. ft. Install clamping flange on tie rod - tightening torque 20 Nm/15 lbf. ft.     Adjust    Adjust toe - see operation "Toe-in, Adjust" in group "E".

Related Literature Units -

12 Steering & suspension